AS Series Programming Manual Five bits as a group are shifted to the left. 5 Being carried 1 2 3 4 Additional remarks 1. If S + n 2 -1 or D + n 1 -1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 2. If n 1 is not between 1–1024, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 3. If n 2 is not between 1– n 1 , the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. _6 6-304 X0.4 X0.3 X0.2 X0.1 X0.0 M1 5 M14 M13 M12 M11 M10 M9 M8 M7 M6 M5 M4 M3 M2 M1 M0