AS Series Programming Manual If the minimum output value in S 1 is larger than the maximum output value in S 2 , the instruction is not executed. 2. Only the 32-bit instructions can use the 32-bit counter, but not the device E. Example When X0.0 is ON, the instruction converts the state of X1 into a binary value, and stores the conversion result in D0. Then the instruction compares the value in D0 with 500 and 5000, and stores the comparison result in D1. Additional remarks If the minimum output value in S 1 is larger than the maximum output value in S 2 , the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003.
6-378 Minimum output Maximum output Output value in D0 Function Output value in D1 value value 500 5000 499 D0 500 5001 D0>5000 5000 600 500≦D0≦5000 600 6 _