Chapter 6 Applied Instructions D100=K2, indicating DST state is being read. Enable contact M1 Setting values and descriptions: Use the instruction DST or HWCONFIG in ISPSoft to read the daylight saving state. The HWCONFIG converts the result from week number to the corresponding dates and months automatically. 6_ 6-517 Device Setting Description Value D100 2 Before firmware V1.04 (V1.04 excluded), function code is fixed to 2, indicating the DST state is being read. 7 After firmware V1.04 (V1.04 included), function code is 4, indicating the DST state is ON and in mode 2. D101 5 Starting month: May D102 2 Starting week number: the 2nd week D103 3 Starting day: Wednesday D111 9 Ending month:
September D112 3 Ending week number: the 3rd week D113 5 Ending day: Friday D120 60 Duration: 60 minutes Y0.1 ON Node state is ON.