Chapter 2 Devices 2_ 2-77 AS300 Series AS200 Series Latched Attribute Default OFF STOP RUN SR Function ON RUN STOP SR412 of measurement is 100 microseconds). Milliseconds are stored in SR411 (range is 0–65535). Microseconds are stored in SR412 (the range is 0–900). For example, if SR411=12 and SR412=300, then the current scan time is 12.3 milliseconds. ○ ○ 0 - - N R 0 SR413 The maximum scan time is stored in SR413 and SR414 (unit of measurement is 100 microseconds). The value of the millisecond is stored in SR413. ○ ○ 0 - - N R 0 SR414 SR415 The minimum scan time is stored in SR415 and SR416 (unit of measurement is 100 microseconds). The value of the millisecond is stored in SR415.
○ ○ 0 - - N R 0 SR416 SR421 Duration of the timer interrupt I601 (unit: milliesecond). The default is 0, meaning the system uses the settings in HWCONFIG. ○ ○ 0 0 - N R/W 0 SR422 Duration of the timer interrupt I602 (unit: milliesecond). The default is 0, meaning the system uses the settings in HWCONFIG. ○ ○ 0 0 - N R/W 0 SR423 Duration of the timer interrupt I603 (unit: milliesecond). The default is 0, meaning the system uses the settings in HWCONFIG. ○ ○ 0 0 - N R/W 0 SR424 Duration of the timer interrupt I604 (unit: 0.1 milliesecond). The default is 0, meaning the system uses the settings in HWCONFIG. ○ ○ 0 0 - N R/W 0 SR440 MAC address (Example:
12:34:56:78:9A:BC => SR440=16#1234, SR441=16#5678, SR442=16#9ABC) ○ ○ - - - Y R - SR441 ○ ○ - - - Y R - SR442 ○ ○ - - - Y R - SR443 PLC series EX：AS324MTAW15500012 AS SR443 = 16#5341 32 SR444 = 16#3233 4M SR445 = 16#4D34 TA SR446 = 16#4154 W1 SR447 = 16#3157 55 SR448 = 16#3535 00 SR449 = 16#3030 01 SR450 = 16#3130 2 SR451 = 16#0032 ○ ○ - - - Y R - SR444 ○ ○ - - - Y R - SR445 ○ ○ - - - Y R - SR446 ○ ○ - - - Y R - SR447 ○ ○ - - - Y R - SR448 ○ ○ - - - Y R - SR449 ○ ○ - - - Y R - SR450 ○ ○ - - - Y R - SR451 ○ ○ - - - Y R - *SR453 If an error occurs during the operation of the memory card, the error code is recorded. ○ ○ - - - Y R 0 SR460 Y0.0/axis 1 (Y0.0/Y0.1) position (unit:
number of pulse) ○ ○ - - - Y R/W 0 SR461 SR462 Axis 1 (Y0.0/Y0.1) output mode ○ ○ - - - Y R/W 0 SR463 Axis 1 (Y0.0/Y0.1) starting/ending frequency ○ ○ - - - Y R/W 200