AS Series Programming Manual 3. When the client and server are both AS Series PLC and the communication timeout settings are set the same, the server automatically cuts the connection if a timeout occurs on the server first. In this case, the error flag on the client is not ON. On the other hand, if a timeout occurs on the client first, the error flag on the client is ON and the connection is cut.
6-714 Error Code Error Flag Description (SR180) 16#6209 UDP Socket error flag Illegal IP address 16#620A UDP Socket error flag Illegal communication mode 16#620C UDP Socket error flag Illegal address for sending data 16#620D UDP Socket error flag Length of sent data exceeds the range 16#620E UDP Socket error flag Source data device exceeds the range 16#620F UDP Socket error flag Illegal address for receiving data 16#6210 UDP Socket error flag Length of data received exceeds the range 16#6211 UDP Socket error flag Target data device exceeds the range 16#6213 UDP Socket error flag Size of data received larger than dataset 16#6215 UDP Socket error flag UDP Socket not connected 16#6217 UDP Socket error flag UDP Socket connection triggered 16#6218 UDP Socket error flag Sending of data through UDP Socket triggered 16#621A UDP Socket error flag Disabling UDP Socket connection triggered 6 _