Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the 1041M-T2+. Installation and maintenance should be performed by experienced technicians only. The 1041M-T2+ is a 1U server based on the SC818TQ+-1000LP rackmount chas- sis and the Super H8QMi-2+, a quad processor serverboard that supports AMD Opteron 8000 series Socket F type processors and up to 128 GB of registered ECC DDR2-667/533/400 SDRAM. Manual Organization Chapter 1:
Introduction server system and describes the main features of the H8QMi-2+ serverboard and The fi rst chapter provides a checklist of the main components included with the the SC818TQ+-1000LP chassis, which comprise the 1041M-T2+. Chapter 2: Server Installation This chapter describes the steps necessary to install the 1041M-T2+ into a rack and was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. check out the server confi guration prior to powering up the system. If your server Chapter 3:
System Interface Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. iii