Super Micro Computer, Inc. 1041M-T2+ — Super Micro 1041M-T2+ User Manual: Comprehensive Guide for System Integrators

Chapter 7: BIOS Thermal Throttling This setting is used to Enable or Disable Thermal Throttling. Microcode Update This setting is used to Enable or Disable microcode updates for Virtual Machine. SVM uCode Option This setting is used to Enable or Disable processor-assisted virtualization. Power Now This setting is used to Enable or Disable the AMD Power Now feature. Thermal Throttling This setting is used to Enable or Disable Thermal Throttling. X Floppy/IDE/SATA Confi guration Floppy A Move the cursor to these fi elds via up and down keys to select the fl oppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3Ѕ", 1.44 MB 3Ѕ” , and 2.88 MB 3Ѕ".

Floppy B Move the cursor to these fi elds via up and down keys to select the fl oppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3Ѕ", 1.44 MB 3Ѕ” , and 2.88 MB 3Ѕ". Onboard Floppy Controller Use this setting to Enable or Disable the onboard fl oppy controller. Onboard IDE Controller There is a single fl oppy controller on the motherboard, which may be Enabled or Disabled with this setting. Serial ATA Devices This setting is used to determine if SATA drives will be used and how many. Op- tions are Disabled, Device 0, Device 0/1 and Device 0/1/2 . nVidia RAID Function This setting is used to Enable or Disable the nVidia ROM. If Enabled, the setting below will appear. 7-5