Product Overview ASDA-B3 1.1 Components of the servo set A complete servo set includes: 1 (1) A servo drive and a servo motor. (2) A UVW motor power cable: one end of the U, V, and W wires connects to the servo drive and the other end to the motor (optional purchase). (3) A green ground wire: it connects to the ground terminal of the servo drive (optional purchase). (4) An encoder cable: one end of it connects to the encoder and the other end to the CN2 on the servo drive (optional purchase). (5) A 26-pin connector for CN1 (optional purchase for B3 -F, M, and E models). (6) A 44-pin connector for CN1 (optional purchase for B3 -L models). (7) A 6-pin connector for CN2 (optional purchase).
(8) An RJ45 connector for CN3 and CN6, which you use for general (RS-485) communication (optional purchase). (9) A 4-pin connector for CN4 (Mini USB connector) (optional purchase). (10) Power supply for the servo drive: (11) One metal piece for short-circuiting the terminal block. (12) An installation instruction sheet. 1-2 Model Control circuit Main circuit Regenerative resistor 100 W - 3.0 kW L1C, L2C terminal block R, S, T terminal block P , D, C, terminal block