ASDA-B3 Test Operation and Panel Display Refer to Section 3.10.2 for the wiring for Position (PR) control mode. See the following table for the 100 sets of PR and the Position commands (POS0 - POS6). 4 0: the switch is open (off). 1: the switch is closed (on). You can set the 100 sets of PR (P6.000 - P7.099), which you can also set for absolute position commands. 4-23 Position Corresponding POS6 POS5 POS4 POS3 POS2 POS1 POS0 CTRG command parameter 0 0 0 0 0 0 0 ↑ 0 0 0 0 0 0 1 ↑ 0 1 1 0 0 1 0 ↑ 0 1 1 0 0 1 1 ↑ 1 1 0 0 0 1 1 ↑