Delta Electronics — 5.2.3 Auto tuning with ASDA-Soft (software)

Tuning ASDA-B3 Follow these steps to set the motor running path: 1. Set the system to the Servo ON state. 5 2. Set the acceleration / deceleration time and jog speed. The default setting for acceleration / deceleration time is 500 ms. Set the jog speed to no less than 500 rpm. Then click Download . 3. After you set the motor’s running path, you can use the Left or Right button to run the motor to Position 1 and Position 2. Then, click Start Moving to run between two positions. The motor moves to Position 1 and Position 2 in the forward and backward directions. Before running the motor, make sure no one is standing close to the machinery. Then, click Next . Left Right 5-12