ASDA-B3 Motion Control You can use the panel, communication, or ASDA-Soft to read data from or write data to the data array. Regardless of the methods, they are completed by parameter settings. The first group of parameters for reading and writing the data array are P5.011, P5.012, and P5.013. P5.011 specifies the address for reading and writing the data array. P5.012 and P5.013 are for reading 7 and writing the actual data contents. You can use both to read and write, but the behaviors after reading and writing differ. Refer to Table 7.2.1.1 for more information. The second group of parameters for reading and writing the data array are P5.011 and P5.100 - P5.103.
P5.011 specifies the address for reading and writing the data array. P5.100 reads data from or writes data to the data array address set by P5.011. P5.101 reads data from or writes data to the data array address following the address set by P5.011. P5.102 and P5.103 work the same way. If the address value accumulates and exceeds the maximum of 19, the returned address is 0. You can find more details in Table 7.2.1.2. Table 7.2.1.1 Group 1 - reading and writing the data array Example: when using the drive panel or communication for reading from or writing to the data array, input values to the data array address in sequence as follows:
Data array #11 = 100, Data array #12 = 200, Data array #13 = 300. Then the data is read in sequence. 7-59 Parameter Description P5.011 Address for reading / writing Specify the address in the data array when reading and writing data. Window for by Behavior after reading Behavior after writing reading / writing P5.012 Window #1 for reading / writing Panel Value of P5.011 does not add 1 Value of P5.011 adds 1 Communication / ASDA-Soft Value of P5.011 adds 1 Value of P5.011 adds 1 P5.013 Window #2 for reading / writing Panel Value of P5.011 adds 1 Cannot be written with the drive panel Communication / ASDA-Soft Value of P5.011 adds 1 Value of P5.011 adds 1