MODBUS Communication ASDA-B3 Anti-interference methods In the signal transmission process, if there is interference, it may result in signal distortion. 9 Therefore, it is important to eliminate interference. The elimination methods are as follows: 1. Add a terminal resistor. 2. Check if the servo drive is installed in a high magnetic field environment. If so, keep it as far away as possible. 3. Use a shielded twisted-pair cable for the transmission line. 4. When wiring, isolate the high voltage power cable from the signal line. 5. Use a magnetic ring at the power input. 6. Add X capacitor and Y capacitor, which are IEC 60384-14 certified, at the power input. 9-16