ASDA-B3 Absolute System 10.2 Installation 10.2.1 Installing the battery box in the servo system 10 DO NOT wire Pin 3 and Pin 4 of the servo drive CN2 connector. They are for internal use only; wiring them will cause damage to the internal circuit. When using an absolute encoder, the battery supplies power directly to the encoder, so wiring to the CN2 connector of the servo drive is not required. Single battery box (standard wiring) (1) (2) (3) BAT +/- Encoder B3 CN2 (4) (1) Encoder cable; (2) Single battery box (absolute type); (3) CN2 connector; (4) Battery box wiring 10-9