ASDA-B3 Wiring Refer to the following table for UVW connector specifications. 3 Wire selection: use a 600 V AC PVC cable. Refer to Section 3.1.6 for more information. Note: 1. In the servo motor model name, 1 represents the motor inertia, 2 represents the encoder type, 3 represents the brake or keyway / oil seal type, 4 represents the shaft diameter and connector type, and 5 represents the special code. 2. Power supply for the brake is 24 V DC . Do not share the same power supply with control signals. 3. The brake coil has no polarity. Its pin symbols are BRAKE1 and BRAKE2. 4. Color of brake cable for motors with the frame size of 40 - 86 mm: brown and blue.
3-11 Motor model UVW connector ECM-B3 1-C 2 0401 3 4 5 ECM-B3 1-C 2 0602 3 4 5 ECM-B3 1-C 2 0604 3 4 5 ECM-B3 1-C 2 0804 3 4 5 ECM-B3 1-C 2 0807 3 4 5 ECM-A3 1-C 2 040F 3 4 5 ECM-A3 1-C 2 0401 3 4 5 ECM-A3 1-C 2 0602 3 4 5 ECM-A3 1-C 2 0604 3 4 5 ECM-A3 1-C 2 0804 3 4 5 ECM-A3 1-C 2 0807 3 4 5 Recommended brand Model number Molex 50-36-1735 (housing) 39-00-0040 (terminal) JWT C4201H00-2*2PA (housing) C4201TOP-2 (terminal) Pin assignment CASE GROUND (Green / Yellow) U (Red) V (White) W (Black) BRAKE1*4 BRAKE2*4 1 2 3 4 - - Recommended brand Model number 50-36-1736 (housing) Molex 39-00-0040 (terminal) C4201H00-2*3PA (housing) JWT C4201TOP-2 (terminal) Pin assignment CASE GROUND (Green / Yellow) U (Red) V (White) W (Black) BRAKE1*4 BRAKE2*4 1 2 4 5 3 6 3 4 5 3 4 5 3 4 5 3 4 5 3 4 5 3 4 5 3 4 5