ASDA-B3 Wiring 3 Wire selection: use a 600 V AC PVC cable. Refer to Section 3.1.6 for more information. Note: 1. In the servo motor model name, 1 represents the motor inertia, 2 represents the encoder type, 3 represents the brake or keyway / oil seal type, 4 represents the shaft diameter and connector type, and 5 represents the special code. 2. Power supply for the brake is 24 V DC . Do not share the same power supply with control signals. 3. The brake coil has no polarity. Its pin symbols are BRAKE1 and BRAKE2. 4. Color of brake cable for motors with the frame size of 100 mm or above: red and black. The model number of UVW connector is MIL 18-10S and that of the brake connector is CMV1-2S.
3-13 Motor model UVW connector ECM-B3 1 -E 2 1310 3 4 5 ECM-B3 1 -E 2 1315 3 4 5 ECM-B3 1 -E 2 1320 3 4 5 1 2 Recommended brand Model number for UVW end CE05-6A18-10SD-D-BSS(R1) (connector) DDK CE3057-10A-1-D(R1) (cable clamp) SUNCHU CMS3106S18-10SBI WPS3106A18-10S-R (connector) PLT WPS3057-10A-R (cable clamp) Recommended brand Model number for brake end DDK CM10-SP2S-x-D or CMV1-SP2S-x-D SUNCHU SC-CMV1-SP02C Pin assignment CASE GROUND U (Red) V (White) W (Black) BRAKE1*4 BRAKE2*4 (Green / Yellow) A B C D 1 2 3 4 5 3 4 5 3 4 5