Specifications ASDA-B3 A Note: 1. The rated torque is the continuous permissible torque between 0˚C - 40˚C (32˚F - 104˚F) operating temperature which is suitable for the servo motor mounted with the following heat sink dimensions. F04, F06, and F08: 250 mm x 250 mm x 6 mm Material: aluminum 2. The built-in servo motor brake is only for keeping the object installed on the motor in a stopped state. Do not use it for deceleration or as a dynamic brake. 3. In the servo motor model name, 1 represents the inertia and 2 represents the encoder type. 4.
Models with the operating temperature ranging from -20˚C to 60˚C (-4˚F to 140˚F) and storage temperature ranging from -20˚C to 80˚C (-4˚F to 176˚F) are under certification. If the operating temperature is over 40˚C (104˚F), refer to the power derating curves of B3 motors in Section A.2.6. 5. The load definition for the motor output shaft is as follows. Follow the load specification when operating. LR-5 Radial load Thrust / axial load A-12 ECM-B3 1 C 2 0401 C 2 0602 C 2 0604 C 2 0804 C 2 0807 Vibration grade (μm) Operating temperature Storage temperature Operating humidity Storage humidity Vibration capacity IP rating Approvals R R