Delta Electronics — A.2.1 ECM-B3 series servo motor

Specifications ASDA-B3 A Note: 1. The built-in servo motor brake is only for keeping the object installed on the motor in a stopped state. 2. The rated torque is the continuous permissible torque between 0°C - 40°C (32°F - 104°F) operating Do not use it for deceleration or as a dynamic brake. temperature which is suitable for the servo motor mounted with the following heat sink dimensions. F130: 400 mm x 400 mm x 20 mm F180: 550 mm x 550 mm x 30 mm Material: aluminum 3. In the servo motor model name, 1 represents the inertia and 2 represents the encoder type. 4.

Models with the operating temperature ranging from -20˚C to 60˚C (-4˚F to 140˚F) and storage temperature ranging from -20˚C to 80˚C (-4˚F to 176˚F) are under certification. If the operating temperature is over 40˚C (104˚F), refer to the power derating curves of B3 motors in Section A.2.6. 5. The load definition for the motor output shaft is as follows. Follow the load specification when operating. LR-5 Radial load Thrust / axial load A-14 ECM-B3 1 E 2 1310 E 2 1315 E 2 1320 E 2 1820 F 2 1830 Storage temperature Operating humidity Storage humidity Vibration capacity IP rating Approvals R R