Specifications ASDA-B3 A Note: 1. The rated torque is the continuous permissible torque between 0˚C - 40˚C (32˚F - 104˚F) operating temperature which is suitable for the servo motor mounted with the following heat sink dimensions. F40, F60, and F80: 250 mm x 250 mm x 6 mm 2. The built-in servo motor brake is only for keeping the object installed on the motor in a stopped state. Material: aluminum Do not use it for deceleration or as a dynamic brake. 3. The load definition for the motor output shaft is as follows. Follow the load specification when operating.
LR-5 Radial load Thrust / axial load A-16 ECM-A3L 040F 0401 0602 0604 0804 0807 Brake release time 20 20 20 20 20 20 [ms (Max)] Brake pull-in time 35 35 50 50 60 60 [ms (Max)] Rated reduction rate 20 10 10 5 5 5 with oil seal (%) Vibration grade (μm) V15 Operating temperature 0˚C - 40˚C (32˚F - 104˚F) Storage temperature -10˚C to 80˚C (14˚F - 176˚F) Operating humidity 20 - 90% RH (non-condensing) Storage humidity 20 - 90% RH (non-condensing) Vibration capacity 2.5 G IP67 (when using waterproof connectors and when an oil seal is fitted to the rotating shaft (for an oil seal model)) IP rating Approvals R R