3. HARDWARE SETUP 3.7.3 Accelerated Graphics Port Pro (AGP Pro) This motherboard provides an Accelerated Graphics Port Pro (AGP Pro) slot to sup- port AGP/AGP Pro graphics cards, such as an ASUS AGP-V6800DDR/64M. CAUTION! To avoid damaging your AGP/AGP Pro graphics card, your computer’s power supply should be unplugged before inserting your graphics card into the slot. AGP Card without Retention Notch Rib (inside slot) Rib 20-pin bay 28-pin bay TOP VIEW K7V Accelerated Graphics Port (AGP PRO) CAUTION! The AGP Pro slot is shipped with a safety tab on the 20-pin bay for use with AGP cards without a retention notch.
DO NOT remove this tab if you will be using such cards; removing may cause these cards to shift, which may cause damage to your card, slot, and motherboard. Remove ONLY when you will be using an AGP Pro card. Use a rigid tip, such as a pen tip, to dislodge and remove the tab from the bay. Expansion Cards 3. H/W SETUP Removing the tab 3.7.4 Audio Modem Riser (AMR) Slot This connector supports a specially designed audio and/or modem card called an AMR. Main processing is done through software and controlled by the motherboard’s sys- tem chipset. This provides an upgradeable audio and/or modem solution at an incred- ibly low cost.
There are two types of AMR, one defined as primary and another de- fined as secondary. This motherboard uses the primary channel so that a secondary AMR can coexist without the need to disable the onboard CODEC. The motherboard’s onboard CODEC (optional) must be disabled when using a primary AMR. NOTE: An AMR is not included with this motherboard. 0 1 0 1 0 1 K7V ® K7V Audio Modem Riser (AMR) Slot ASUS K7V User’s Manual 33 ® V7K 0 1 0 10 1