Atari 130XE — 130XE Owners Manual_Page_039

TABS On a blank screen move the cursor to the left margin and type an asterisk. Press the ITabl key. Every time the cursor stops, type an asterisk. You should have six asterisks spaced across the screen as shown below: * * * * * * Pre ss the I Tab l key only and notice that it stops at the same preset tab marks every time. The first preset tab is five spaces from the left margin (a normal paragraph indention), and the following tabs are eight spaces apart. Position the cursor on top of the fi rst asterisk and move it in three spaces. Press and hold I Shift I and then press IT abl to activate the I Set Tab I function. Move the cursor back to the left margin, then press the lTabl key.

The cursor jumps to the newly set tab position. Continue to press the I Tab I key. It continues to go to al l the preset tab positions, in addition to the new one. When the cursor jumps down to the next line , it ignores the new tab position . (But on al l the following lines the cursor will go to all the tab positions-the new one and the preset ones.) Return the cursor to the first asterisk and press the IT ab l key. The new tab mark is still there. Return the cursor to the left margin. Press ITabl to move it to the first tab mark (three spaces in). Use the I Control I key with the lTabl key to activate the IClr Tab I function.

Press the I Tab I key to get to the ne xt tab position and clear that one also. Move the cursor back to the left margin of the same line and press the lTab I key only. The cursor should skip two tab positions. Continue pressing the IT ab l key until the cursor drops to the next line. IClr Tab I did not clear the second tab position on this line. (However, both tab positions have been cleared from all the following lines.) INVERSE VIDEO Type the word ATARI . Find the In verse Video key ~ and press it just once. Type ATARI again. Press the Inverse Video key again and type AT AR I again. Your screen should look like this:

· ATARI r·U·lin ATARI In verse Video creates blue letters on a white background, the inverse of the normal screen colors. This function is very useful for high li ghting letters in your programs. Just one touch of the In verse Video key changes th e way the letters are displayed. 33