Cuaprer 2 — Sece-Test &oi AREA 51 OPERATOR’S MANUAL Entering and Exiting the Self-Test The game's self-test switch is located behind the upper coin door. Turning it on causes the screen to enter the self-test mode. Doing so displays the Select Test menu; Select Test Menu Choose which test or screen you want to run from this menu, shown in Figure & Table 2-1. Run the item by shooting it twice with a gun or by pressing the left start button to select it and then the right start button to run it. see Figure 2-1. Exit the self-test by turning off the self- ey test switch at any time.
It is likely that version numbers shown in the self-test screens in this manual will be different from those om ADJUST VOLUME PUPVii vice) Py Ola ers hy COIN OPTIONS shown on your game. The functioning of the menus, however, will be the same. CONTROLS TEST cert e DISK TEST Using the Gun Either gun can be used in the self test menus to make selections or adjustments. A menu item can be selected by aiming the gun at it and then clicking the gun trigger. A menu item can be run by aiming the gun at it and clicking the trigger twice.
The top, bottom, left, and right of the screens that are marked with arrows can be activated with the gun to move up and down the menu, to change selections, and to make adjustments (such as the game volume). Select Test Menu MEMORY TESTS MONITOR TESTS hes ae sees ORR mor ea SERIAL# Figure 2-1 “wy eta FGD32746 Select Test Menu Screen Adjust Volume Adjust the volume of the game shown in Figure 2-2.
using this screen, ADJUST VOLUME Adjust Volume a Statistics Statistics Histograms Game Options 33 Coin Options vi Controls Test PURE es Gun Test To RESTORE old Setting Press right START To ADJUST volume, Use GUN ICRC eG LCR e ede Disk Test Memory Tests Color RAM ae baal Working RAM DRAM Bank 1 DRAM Bank 2 All RAM ROM Test Monitor Tests Color Test Purity Test Convergence Test Table 2-1 2-2 Summary of All Self-Test Screens Figure 2-2 Adjust Volume Screen The software plays continuous music to allow you to adjust both the game and attract-mode volume levels. The word GAME or ATTRACT flashes to show which of the two volumes levels you are adjusting.
Fire the gun at the top or bottom of the screen to select between the two and to the left or right of the screen to adjust volumes. The attract-mode volume level has four steps: mute, 1/3, 2/3 or full volume level (these