Toolbox Items ACE User's Guide, 3.6.x, 18316-000 Rev A Page 1007 Item Description NOTE: This tool requires a special license. For details, see Licensing Requirements on page 28. Input/Output But- ton Provides a specialized button used to toggle a digital output or display the state of a digital input. Its operation is similar to the Toggle Button (see below); how- ever, it is used exclusively for digital input/output signals, and it uses a sim- plified set of configuration controls. Robot Jog Control Inserts the Robot Jog Control. For more details on the Robot Jog Control, see Robot Jog Control on page 163. Sign In Button Provides a specialized button that displays the user Sign In dialog.
For details on the Sign In dialog, see Signing In on page 128. NOTE: Certain functionality is limited, based on the sign-in level. For details, see Appendix 2: User Access Item List on page 1168. Sign Out Button Provides a specialized button that is used to sign out of the current access level. For details on signing out, see Signing Out on page 128. Transform Editor Provides controls used for entering transform coordinates (X, Y, Z, yaw, pitch, roll). For example, if this was linked to the Gripper object offset, it would allow the operator to use the UI to modify the tool offset. It could also be used to modify a frame or location origin.
For details on tool offsets, see Using a Tool Offset on page 261. For details on locations, see The Coordinate System on page 58. User Interface Form Display But- ton Provides a button that is used to launch another User Interface Form. For example, you could have a "master" or "parent" form that contains a button to launch a sub-form or "child" form. You can use the Connection properties group to set the mode of the "child" form. For information on the Connection properties, see Properties on page 1011. NOTE: The access level of the child (sub-form) is inherited from the parent form. For details on access levels, see User Manager on page 1013.
Vision Display Displays a vision image from the specified vision camera source. The Image Source property must be set to the camera whose image should be displayed in this area. Advanced Tools NOTE:These tools require a special license. For more details on licenses, see Licensing Require- ments on page 28.