omron — V+ versus Emulation Mode

V+ versus Emulation Mode When emulation mode is enabled, certain Controller Editor and Robot Editor features are not avail- able. Those features are dimmed or hidden to indicate that they are not available. For details on the Controller Editor, see Controller Editor on page 97. For details on the Robot Editor, see Robot Editor on page 114. l I/O signals are handled differently In emulation mode, you can use the Digital I/O window to set input signals. For more information in the Digital I/O window, see Digital I/O Window on page 166.

l Robot-to-hardware calibrations have changed The robot-to-hardware calibrations and workspace-referencing procedures have changed when oper- ating in emulation mode. When emulation mode is enabled, these procedures use the 3D Visu- alization display to allow for offline calibration/configuration. For more details, see Emulation Mode Wizards on page 185. l Belt object editor has changed When emulation mode is enabled, the Belt object editor includes settings for fast speed, slow speed and latch position distance. For details, see Belt on page 809.

l Virtual Camera object editor has changed When emulation mode is enabled, the Virtual Camera object editor adds an Emulation Configuration parameter, which is used to specify the operating mode. For more details, see Virtual Camera Emu- lation Configuration (Behavior) on page 1102. l Cycle times are not identical When emulation mode is enabled, the cycle times will not exactly match those obtained in real mode. l Enable power and calibration is handled differently When emulation mode is enabled, the robot power is enabled and the robot is automatically cal- ibrated in the following situations:

l When loading a workspace l When creating a controller l When rebooting the controller l When changing a Quattro platform V+ versus Emulation Mode When ACE is in emulation mode, a V+ emulator is executed for each Controller object in the workspace. From a user perspective, this is transparent — the V+ emulators are executed automatically. ACE User's Guide, 3.6.x 18316-000 Rev A Page 1092