File Explorer Mount NFS Drives Dialog Box 3. Enter the information in the Mount NFS Drives dialog box, as follows: 4. Click OK to store the information. The new entry is added to the Most Recent Mounts list and the NFS drive is mounted to the controller. NOTE: If you are unable to mount the selected drive/directory, you may have entered an incor- rect IP address or NFS Path. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 175 Item Description Most Recent Mounts Click the down arrow to display a list of the recently-used NFS-mounted drives. NFS Path Enter the physical path of the exported drive/directory.
The drive/directory names in the path must be eight characters or less, and must use alpha- numeric characters or underscores (spaces or other characters are not allowed). NFS Drive Enter a name for the mounted drive/directory. The name must be eight char- acters or less, and must use alpha-numeric characters or underscores (spaces or other characters are not allowed). IP Address Enter the IP address of the PC that has the exported drive/directory. Description Enter a brief description of the drive/directory being mounted.