Configuring S-Curve Profiles S-Curve Profile Configuration Dialog For each profile, the last four columns show the number of seconds required to ramp up or down to 100% acceleration or deceleration. The elements of the S-Curve Profile Configuration dialog box are described below: ACE User's Guide, 3.6.x, 18316-000 Rev A Page 247 Item Description Index The index position to which the corresponding profile will be stored. Enabled If checked, the corresponding profile is available for use in your programs. Accel Ramp Up Time The ramp-up time for the acceleration phase of the profile. Accel Ramp Down Time The ramp-down time for the acceleration phase of the profile.
Decel Ramp Up Time The ramp-up time for the deceleration phase of the profile. Decel Ramp Up Time The ramp-down time for the deceleration phase of the profile.