Save Configuration Data to a File Save Configuration Data to a File Use this option to save the configuration data for the current device to a disk file. The configuration file can be used later to load the configuration data to another system or to restore the configuration in the event of a system problem. When the Save is performed, the configuration data currently stored in the Configuration Manager Utility program is written to a file. To save configuration parameters: 1. Before saving, make sure that you have written all of your current configuration changes to the con- troller. 2.
From the Configuration Manager menu, select File > Save configuration (or use shortcut Ctrl+S) to display the File Save dialog. Save As Dialog If you have not applied the changes to the controller, you will receive a warning message and an opportunity to apply the changes to the controller before saving the configuration data to a file. 3. Choose the directory for the file and enter the file name. ACE User's Guide, 3.6.x 18316-000 Rev A Page 292