Editor Parameters View Menu All licenses Displays all known licenses. This is the same as checking the Display all licenses check box. Help Menu Help Displays this user guide. Editor Parameters The middle portion of the License Manager contains the editor parameters. These are used to configure vari- ous settings on the selected robot. The items in this area change, based on the selected tab. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 297 Item Description Current Controller Information Displays the controller ID and information in a scrolling panel. This allows you to verify the information that is provided on the license page.
Enter Controller License Pass- word To install or remove a license, enter the password provided by Adept Customer Service for the license, then click Install or Remove. The result of the installation process appears in the Results field. Install Click to install a license. This operation requires a valid password in the Enter Controller License Password field, which must be obtained from Adept Customer Service. Remove Click to remove the controller license. This operation requires a valid password in the Enter Controller License Password field, which must be obtained from Adept Customer Service. Results Displays the result of the installation process.
Display area This area provides a list of licenses that are currently installed. Optionally, you can enable the Display all licenses check box to display all known licenses. Display all licenses Select this check box to display all known licenses. Otherwise, the display area will display the licenses that are currently installed. Copy to Clipboard Click to copy the contents of the display area to the Windows clip- board. The clipboard contents can be pasted into an email when corresponding with service personnel. Close Closes the License Manager.