Arc Caliper l Radial - Radial projection is used to find edges aligned along radial projections, much like the spokes of a wheel. The default Projection Mode is Radial. Results Logging If enabled, the results of the tool will be logged to a file. If the extension of the destination file is csv, then the log is written in csv format, which opens with Excel. If a different extension is selected, the log is written in a plain text format (similar to the ACE Sight 2 format). The size of the log file can be set (default size is 5 Mb).
Related Topics Arc Caliper Tool Configuring Caliper Properties Arc Caliper Results Arc Caliper Results Results for edges found by the Arc Caliper tool are shown in the grid of results, below the Dis- play window, as shown in the following figure. ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 369