omron — ACE Sight Camera Calibration

ACE Sight Camera Calibration l Define the Region of Interest Defining the Region of Interest 1. Adjust the bounding box to the camera field of view. This must include the cal- ibration target. 2. If no magenta origin marker is displayed, click Run. If necessary, move the robot so the target can be located, then click Run. l Start the Calibration 1. Close the pendant window by clicking Cancel. 2. Click Start. The robot will perform multiple moves, taking images after each move. When this step is complete, the Task Manager pane displays "Calibration completed successfully". The final screen displays the calibration error detected during the calibration. An example follows:

ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 690