omron — ACE Sight Camera Calibration

ACE Sight Camera Calibration l Select End-Effector Tip This allows you to test a calibration with a different end-effector tip than the one that was used for calibration. l Move the Robot to the Picture Position 1. Move the robot out of the way of the camera. The robot should not be in the camera's field of view. 2. Click Here. l Teach the Vision Tool The following figures show the model, origin, and bounding box before and after this procedure has been performed. Vision Model Before Teaching ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 714