omron — ACE Sight Latch Calibration

ACE Sight Latch Calibration 1. Click Next on the Welcome screen. 2. Select a robot, then click Next. Click on the hand icon to display the available robots. 3. Select an end-effector for the robot, then click Next. Click on the hand icon to display the available end-effectors. 4. Select a belt calibration. Click on the hand icon to display the available belt calibrations. 5. Click Finish. A Latch Calibration object will have been created in the Tree structure. If you double-click on that object, it will open the object editor. From there, you can verify that the Encoder Num- ber you selected for the SmartController is set correctly.

Related Topics Calibration Overview ACE Sight Belt Calibration ACE Sight Camera Calibration ACEUser's Guide, 3.6.x, 18316-000 Rev A Page 744