omron — Installing and Enabling OPC

OPC Data Access and Process Control OPC Data Access and Process Control NOTE: The OPC communications feature requires the USB hardware key (dongle) containing the OPC license. See Licensing Requirements on page 28 for details. OPC stands for OLE for Process Control. It uses Microsoft’s COM and DCOM technology to enable applic- ations to exchange data on one or more computers using a client/server architecture. OPC defines a common set of interfaces, so applications can retrieve data in exactly the same format regardless of whether the data source is a PLC, DCS, gauge, analyzer, software application or anything else.

The data can be available through different connections, such as serial, Ethernet, or radio trans- missions. Different operating systems, such as Windows, UNIX, DOS, and VMS are also used by many pro- cess control applications. The purpose of OPC is to provide a standards-based infrastructure for the exchange of process control data that accommodates all of these different data sources, connections, and operating systems. The OPC protocol consists of many separate specifications. OPC Data Access (DA) provides access to real- time process data.

Using OPC DA you can ask an OPC server for the most recent values of anything that is being measured, such as flows, pressures, levels, temperatures, densities, and more. OPC support in ACE OPC is limited to the DA specification. For more information on OPC, please see the OPC Foundation website at the following URL: http://www.opcfoundation.org Installing and Enabling OPC In ACE, OPC is used to: l communicate the values of specified V+ global variables. l control (remotely start or stop) an ACE application. l control (remotely start or stop) an ACE process. To enable the OPC Data Access and Process Control feature: 1.

The OPC option license must be available on the USB hardware key (dongle). See PC Licenses on page 29 for details. When the OPC license is available, the Edit OPC window displays the number of licenses available and in use, as shown in the following figure. If the OPC license is not detected, the interface: l disables the Edit OPC window l changes the Workspace Explorer status bar OPC icon to "not connected" (when clicked on, the text indicates the license is not enabled) 2. Select the OPC Connection Enabled option in the Edit OPC window. This enables the ACE OPC server. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 785