omron — Process Flow

V+ Controller Software For the processing of Part Targets, any targets configured as a latched Pallet will be passed from robot to robot, allowing each one to fill the slots with parts as defined by the Process Strategy. There is no logic running that tries to optimize the allocations of parts or targets. The process strategy simply requests that each robot process as many Parts and Part Targets as possible, and remaining parts are passed to the next robot. There are user-defined parameters that control this process strategy, namely: l Robot Parameters - used to specify the queue size for the robot.

l Belt Window Parameters - used to set part-processing filters, which help to optimize cycle time. l Belt Control Parameters - used to set conveyor belt on/off and speed controls, which can dynam- ically adjust the part flow to the robot. These parameters are available in the Process Strategy editor. Custom Process Strategy The system allows you to define your own process strategies, if needed, using C# within the application. V+ Controller Software The V+ application is split into two sections: l The first is a series of V+ programs that are responsible for picking and placing an instance.

l The second is a series of V+ programs responsible for managing the queue of parts and com- municating with the PC. Robot Control Code The V+ code is designed to run without any PC interaction. It is triggered by items arriving in the queue. Motion parameters are defined on the PC and then downloaded to variables on the controller. Multiple instances of this program are run, one for each robot in the configuration. Process Flow The general data flow is as follows: Step 1 There is a Controller Queue that maintains a list of Robot Station objects. The Controller Queue com- municates with programs running in V+.

The Part Source and Target Source identify Part Instances and Part Target Instances for processing asynchronously to this data flow operation. Step 2 The Process Handler runs the part/target allocation algorithm. Part Instances and Part Target Instances are associated with a Robot Station. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 805