Defining Multiple Latch Signals for a Belt Encoder editor, and click Edit . 5. Associate one camera calibration with latch signal number 1001 and the other with 1002, as fol- lows: a. Expand the Belt Latch Configuration group by clicking the + sign next to the item. b. In the Latch Number field, enter the desired latch signal number. c. Click the Use Default drop-down list and select False. d. Click Close to close the editor. For example, as shown in the figure below, the belt camera calibration is associated with latch signal number 1001. 6. Repeat the previous step for the other camera, using latch signal number 1002. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 823