Creating a Part Configuration l Controller Latch - the controller used for the conveyor belt latch signal. In emulation mode, this item changes to: Latch Period in Emulation Mode - the latch period, specified in millimeters. Belt Properties - Vision Mode For this screen: l Belt - the conveyor belt that will be used to handle the part. l Encoder - the belt encoder used to control the conveyor belt. l Vision Tool - the vision tool used to detect the part on the belt. l Use Named Instance - (optional) the named instance of the part. Typically, this is the same as the Model name.
For custom applications where a custom vision tool is used, this item would be used to specify custom names that had been associated with the different results returned from that tool. l Pallet Properties Optional. Selects the pallet that is used to carry the part. Using a Shape for the Pallet Display By default, ACE uses an "invisible pallet" to represent pallets in the 3D visualization display. In other words, the parts and part targets are shown in the pallet arrangement, but the pallet itself is not vis- ible. However, you have the option to use a shape (Box or Cylinder) or STL mesh custom model, which is imported from an STL mesh file.
For details on the 3D visualization display, see 3D Visu- alization on page 176. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 833