Menu Items Menu Items This section describes the selections available from the editor menu. Object Menu Help Displays the online help for the object editor. Refresh Editor Refreshes the contents of the object editor window. Close Closes the object editor. 3D Visualization Menu Visible Displays the calibration objects in the 3D Visualization win- dow. Show Instances Displays the Part and Part Target instances in the 3D Visu- alization window. Process Strategy Menu Process Strategy Displays the Process Strategy editor, which defines the pick- /place strategy for the Process Manager. For details, see Pro- cess Strategy .
Control Sources Menu Control Sources Displays the Control Sources editor, which defines the prop- erties for part and target hardware sources, as required by the selected workcell configuration. For details, see Control Sources . Editor Parameters The middle portion of the editor contains the editor parameters. These are used to configure various items and settings related to the Process Manager object. The editor parameters are described below. ACE User's Guide, 3.6.x 18316-000 Rev A Page 844 Item Description Belt Calibrations Defines the robot-to-conveyor and vision-to-conveyor calibrations for the selected workcell process. For details, see Belt Calibrations.