Configuration Items specify a custom V+ program that controls the motion segment. To use this option, select the check box and then click the Browse ( ) icon to display the wizard. For more details on creating or using a custom V+ program, see Custom V+ Programs on page 937. Move Parameters These parameters control how the robot moves to and from the selected location. They allow you to "fine tune" the robot motion. This is a simplified ver- sion of the Approach/Move/Depart Segment Move Parameters, described above. l To optimize the speed of the robot, apply coarser and faster settings for less-precise motions to and from the location.
l To optimize the precision of the robot, apply finer and slower settings for smoother, more- precise motions to and from the location. Vision Refinement Station Parameters This parameter specifies how the robot moves to and from the Vision Refinement Station. l Move to camera: This is a "static" refinement, where the robot pauses at the Vision Refinement Station. l Vision on the fly: This is an "in motion" refinement, where the robot passes through the Vision Refinement Station without any pause in the robot motion. NOTE: The "Vision on the fly" mode will provide faster throughput, but may require more lighting (to achieve a fast shutter speed) than the "Move to camera" mode.
Move to camera refinement: ACE User's Guide, 3.6.x, 18316-000 Rev A Page 863