omron — Control Sources

Control Sources Feeder Control Sources Control Sources Editor - Feeder Control Example The feeder control source is for a part or part target that is using a feeder (for example, a feeder could be a bowl feeder or an indexing conveyor belt). Note that the Feeder Configuration "Enable" option must be selected. If you are using an IO Feeder (for example, a bowl feeder), see IO Feeder Object on page 148. The Feeder Configuration items are described in the following table: NOTE: In ACE version 3.1.x and later, the Feeder Configuration items are located in the IO Feeder Con- trol. For details, see IO Feeder Object on page 148. NOTE:

When the Feeder Configuration option is enabled, the Other Parameters - Number To Queue option is disabled. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 873 Item Description Use A Feeder Enables the selected feeder. Feeder Specifies the feeder. Click the Browse ( ) icon to select the feeder. Start Delay Specifies the delay (in milliseconds) before the feeder is activated. This delay can be used to ensure the robot has moved out of the pick/image area before the feeder is activated.