omron — Processes

Processes c. (Optional) You can adjust the Velocity, Acceleration, and Deceleration values, as needed. These parameters control the robot motion to the camera location. d. Click Here to record the position. e. (Optional) You can use the Robot Jog Control to move the robot away from the recorded (taught) position, and then click Move to move the robot back to the taught position. 2. Click Next to proceed. The Move the Robot to the Idle Position screen opens. Teaching a Move to Camera Process (Move the Robot to the Idle Position) 3. Complete the remaining steps of the wizard, as described in Teaching a Process on page 894. ACE User's Guide, 3.6.x 18316-000 Rev A Page 904