omron — Sensor Calibrations

Sensor Calibrations Fixed Camera Calibration NOTE: This feature operates differently in emulation mode. For details on emulation mode wizards, see Emulation Mode Wizards on page 185. This section describes the Fixed Camera Calibration wizard in the Process Manager, which is accessed from the Sensor Calibrations group. The Sensor Calibrations group defines the robot-to-sensor calibrations for the selected workcell process. For more details on the Sensor Calibrations group, see Sensor Calibrations on page 909. Sensor Calibrations Group The calibration wizard provides an interactive series of steps that guide you through the calibration pro- cess.

Each step of the wizard contains graphical aids and text that describe the particular step being per- formed. As each step of the wizard is completed, the information from that step is collected and used to populate the fields in the Sensor Calibration Editor. For details, see Sensor Calibrations on page 909. For details on the buttons and indicators on the wizard pages, see Wizards on page 181. NOTE: If your workcell contains obstacles that may interfere with automated movement of the robot during calibration, you must use the manual calibration procedure. For details, see Sensor Calibrations on page 909. To access the Fixed Camera Calibration wizard: 1.

Click Calibrate in the Sensor Calibrations group. The wizard initializes and opens the first page. 2. Read and follow the instructions shown on the wizard page. 3. When you have completed the procedure for the current wizard page, click Next to continue. The next page of the wizard opens. 4. Repeat this process until you get to the end of the wizard procedure. When you complete the last page, the sensor calibration is finished and the wizard closes. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 917