omron — Process Pallet

Process Pallet Process Pallet This section describes the Process Pallet option on the Process menu. The Process Pallet object defines the layout of a pallet, which can be used to pick parts from or place parts to. NOTE: When used with a camera or belt, the camera or belt will be configured to locate the origin of the pallet, not the parts in the pallet. The Process Pallet editor provides an interface for setting various pallet-related parameters, such as the pal- let configuration, location, and properties. The pallet is created as a separate object that can be linked with a frame. The Process Pallet object defines the dimensional information only.

When linked to a frame it will position the pallet in Cartesian space. The Process Pallet editor allows you to specify a custom pallet configuration. This allows you to define indi- vidual X, Y, and Degree positions of each slot. Further, you can define circular pallets or pallets with offset rows. The software calculates the individual positions based on the input data and defines the positions in the Process Pallet object. To create a Pallet object, right-click in the folder area of the Workspace Explorer and select New > Pro- cess > Process Pallet from the menu. The Packaging Pallet object is added to the Workspace Explorer and the Pallet object editor opens.

You can also open the Process Pallet editor by double-clicking the Pallet object in the folder area of the Work- space Explorer. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 927