omron — Creating a Custom Pallet

Creating a Custom Pallet 2. Use the Properties grid to enter the part-location values. Each row of the grid represents one part position on the pallet. For example, if your pallet is 4 x 4 x 1, you will have 16 parts on the pallet and 16 rows defined in the Properties grid. Optionally, you can click Pattern to define the pallet in the Add Pattern dialog, as described in step 4, below. 3. Use the Add button to add another row to the Properties grid. 4. Optionally, click Pattern to display the Add Pattern dialog, which is used to define a Rectangular or Radial pallet configuration.

l If Rectangular is selected, the Add Pattern dialog displays the Rectangular Properties con- figuration items, as shown in the following figure: l If Radial is selected, the Add Pattern dialog displays the Radial Properties configuration items, ACE User's Guide, 3.6.x 18316-000 Rev A Page 930