AutoVISION Quick Start Guide December 2020 5.9. Set Inspection Outputs This tool communicates inspection results to another device. Basic means are [Digital output] and [TCP/IP and Serial Output String]. In addition, you can use some MSLink and industrial protocols. In this example, see how to use [Digital output] and [TCP/IP and Serial Output String]. 5.9.1. Digital Outputs Digital Outputs are a fast, easy method of indicating the inspection results to another device, like a PLC or stack light. a. Select the [Inspection Outputs] in the tool list b. Click the [Digital Outputs] b a c. Assign the outputs in the Digital Outputs pop up window. Click under Output 1/2/3 and select Inspection Done.
Set the desired pulse width time, in this job make it 20 ms (milliseconds).