AutoVISION Quick Start Guide December 2020 Introduction Thank you for purchasing your MicroHawk smart camera. This document is designed as a quick overview on how to use the AutoVISION software to set up a simple vision application. This document will guide you through software installation, and then through the 5 simple steps to deploy your vison application which are Connect to the camera, create “new” job, get a good Image, program and Edit your job, and then finally to Run it. AutoVISION Help Full details for the operation of AutoVISION can be found in Help. You can access the HELP from the UI two ways, either through the menu or by clicking on the help icon .
Additional Material for the purchase, setup and operation of your Omron Vision System can be found on your local Omron Website. These include: Name of Manual Camera specific Datasheets Quickstart Guides Camera specific Hardware User’s manual Communication and Industrial protocol manual