Maintenance 5 Service Procedure see page 5.7.8 Maintenance every 500 operating hours 5-51 Service brake - Checking the brake pads and brake discs, checking the oil level 5-51 Engine – changing oil 5-52 Replacing the oil filter cartridge 5-53 Changing the fuel filter element 5-54 Bleeding the fuel system 5-55 Bleeding the low pressure side: 5-55 Bleeding the high pressure side:
5-55 Air filter, replacing the filter insert, replacing the safety filter 5-56 Heater/air conditioning – cleaning/replacing filter fleece 5-57 Multi-functional lever accumulator - checking gas pressure 5-58 E.C.S.S.-pressure accumulator (Option) - checking gas pressure 5-58 Front and rear axle – checking the oil level 5-59 Transfer box – checking and refilling oil 5-60 5.7.9 Maintenance every 1000 operating hours 5-61 V-Belt, generator – checking and adjusting the tension 5-61 Service Brake - Checking and refilling oil 5-61 Checking and adjusting system pressures 5-61 Hydraulic – Exchanging the venting filter 5-62 Hydraulic system, replacing the filter insert 5-63 5.7.10 Maintenance every 1500 operating hours 5-64 Front and rear axle – changing oil 5-64 Transfer box – changing oil 5-65 5.7.11 Maintenance every 2000 operating hours 5-66 Cooling system – exchanging coolant and cleaning the system 5-66 Checking and adjusting the valve clearance 5-68 Hydraulic system - changing oil 5-69 Ventilating the hydraulic oil tank 5-70 Checking the fuel pump 5-71 Checking the fuel and coolant tubes, replacing the tubes (if required) 5-71 Checking the water pump 5-71 5.7.12 Maintenance every 4000 operating hours 5-72 Lubrication, drive shaft 5-72 WA90-5 – VEAM270100 5-25