Safety 2.3. Precautions for maintenance 6. Remove 3 cover fastening screws on each side of the machine (see arrows). 7. Remove the cover. 8. On both sides, remove the safety pins (1) and the fastening screws (2) for the cab. 2 1 9. Press the "On" (3) and "Lift" (4) buttons simultaneously, until the cab reaches the upper limit stop. 3 10. The top final position has been reached if the slipping clutch of the electric actuator (6) is activated, with a clearly audible sound. 11. Move the safety rod (7) on the right side upward until it reaches the cylinder linkage. 7 7 6 WA90-5 – VEAM270100 2-27 4 G0090003