3.2 Explanation of components Operation 1. Gearshift lever This lever (1) changes the speed range of the transmission. Manual shift This machine has a 4-FORWARD, 4-REVERSE speed trans- mission. Place the gearshift lever in a suitable position to obtain the desired speed range. a ! 1st and 2nd speeds are used for working. b ! 3rd and 4th speeds are used for traveling. c d GK043142 However, when the gearshift lever stopper is being used, it is impossible to shift to 3rd or 4th. Disengage the gearshift lever stopper before trying to shift gear. Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d):
4th REMARK The length of the lever can be adjusted to 3 stages (positions (A), (B), (C)). To adjust the length, remove the screw (E) at the bottom of the lever knob (D), slide the knob to the desired posi- tion, then tighten the screw (E) again. (The lever is installed to position (B) when it is shipped from the factory.) A B C D E GK043143 3-58 WA380-6H – VEAM440100