3.2 Explanation of components Operation 2. Directional lever This lever (2) is used to switch the direction of travel of the machine between forward and reverse. When starting the engine, if the directional lever is not at the N position, the engine will not start. F N In this case, the central warning lamp will light up and the buzzer will sound. R Return the gearshift lever to the N position and start the engine. GK043144 Position F: FORWARD Position N: NEUTRAL Position R: REVERSE REMARK The length of the lever can be adjusted to 3 stages (positions (A), (B), (C)).
To adjust the length, remove the screw (E) at the bottom of the lever knob (D), slide the knob to the desired posi- tion, then tighten the screw (E) again. (The lever is installed to position (B) when it is shipped from the factory.) A B C D E GK043143 3. Gearshift lever stopper This stopper (3) prevents the gearshift lever from entering the 3rd or 4th positions when working. Position (a): Stopper actuated. a Position (b): Stopper released. b GK043145 3-60 WA380-6H – VEAM440100