Komatsu — 3.2.3 Control levers, pedals

Operation 3.2 Explanation of components 7. Brake pedal ! When traveling downhill, always use the right brake pedal, and use the braking force of the engine together with the brake. ! Do not use the brake pedal excessively. If the brake is used too frequently, the brake will overheat. If this happens, the brakes will not work and may lead to a serious accident. ! Do not put your foot on the brake pedal unless necessary. These pedals (7) operate the brakes. Right brake pedal The right brake pedal operates the wheel brakes. Use the right brake pedal for normal braking operations. Left brake pedal The left brake pedal operates the wheel brakes.

GK038041 When the transmission cut-off switch is in the ON position, and if this brake pedal is depressed, wheel brakes are applied and the transmission is set to the neutral position at the same time. If the transmission cut-off switch is at OFF, the left brake pedal acts in the same way as the right brake pedal. REMARK When the accelerator is being used for operating the work equipment, always set the transmission cut-off switch to the ON position and use the left brake pedal to slow or stop the machine. 8. Accelerator pedal This pedal (8) controls the engine speed and output. The engine speed can be freely controlled between low idling and full speed.

GK038041 WA380-6H – VEAM440100 3-63 WARNING WARNING