Operation 3.2 Explanation of components 3.2.5 Cap with lock Use the starting key to open and close the locks on the caps. The fuel tank filler port and the hydraulic tank filler port are equipped with locks. Method of opening and closing cap with lock (for the fuel tank filler port) To open the cap Match mark 1. Insert the key into the key slot. 2. Turn the key clockwise, align the key slot with the match mark on the cap, then open the cap. To lock the cap Lock 1. Turn the cap until tight, then insert the key into the key slot. Open GK032150 2. Turn the key counterclockwise and take the key out.
Method of opening and closing cap with lock (for the hydraulik tank filler port) To open the cap 1. Insert the key into the key slot. a b 2. Turn the starting switch key counterclockwise and bring the rotor groove in line with the aligning mark (1) on the cap. Turn the cap slowly until a “clicking“ sound is made. This releases the lock and allows the cap to be opened. Position (a): OPEN Position (b): LOCK GK043148 To lock the cap 1. Screw the cap into place. 2. Turn the starting switch key to LOCK position (b), then remove the key. 1 GK043149 WA380-6H – VEAM440100 3-65 Shoulder GK032149